奶茶包装定制
奶茶包装指一家奶茶店出品和外带一杯饮品所需的一次性用品：与封口机匹配口径的冷饮杯、配套杯盖、成卷的封口膜、粗孔珍珠吸管，以及打包袋或杯托。安徽天乐在安徽桐城自有产线生产以上全部产品，并按你的品牌印刷。
杯口口径和封口膜绑定了你的设备——把这两样定对，其余都好办。报冷饮杯前请先告诉我们你的封口机型号。
本类目产品
产品详情页目前为英文，规格与起订量通用。
必备
Double-wall hot cup
A double-wall hot cup is a paper cup with a second outer layer of board that traps a pocket of air, so the cup stays comfortable to hold without a separate sleeve. It is the standard hot-drink cup for specialty coffee and hot milk tea.
必备
Cold bubble tea cup
A cold bubble tea cup is a rigid PP or PET cup with a wide rim, typically 90 mm or 95 mm, so it can be closed with heat-sealing film rather than a lid. Rim diameter must match your sealing machine.
必备
Cup lids — hot & cold
Cup lids close a hot or cold cup for carrying. Hot lids are usually sip-through PP; cold lids are flat (for a straw) or dome (for whipped or cheese-foam toppings). Sizes are set by the cup rim and are not interchangeable.
必备
Cup sealing film
Cup sealing film is the heat-sealed membrane that closes a bubble tea cup in place of a lid. It is sold by the roll, printed full-colour, and specified by the cup rim it seals — 90 mm or 95 mm.
必备
Wide boba straw
A wide boba straw is a large-bore straw, around 12 mm, that lets tapioca pearls pass through. It is sold individually wrapped for hygiene, and available in PP, paper or PLA for markets that restrict plastic straws.
必备
Single-cup carry bag
A single-cup carry bag holds one sealed drink upright so it can be carried out or handed to a delivery rider. It is the most-handled item a bubble tea shop gives away, and the one that walks down the street with your brand on it.
必备
Two-cup carry bag
A two-cup carry bag holds two sealed drinks side by side without them tipping. Most bubble tea orders are two or more drinks, so without one the drinks arrive spilled.
建议
Tamper-evident seal
A tamper-evident seal is a frangible sticker placed over the opening of a bag or container so a customer can see whether a delivery order has been opened. Most delivery platforms now require one.
建议
Cup carrier
A cup carrier (or cup holder) is a moulded tray that holds two or four drinks upright for carrying and delivery. Most bubble tea and coffee orders are two or more drinks, so without a carrier they arrive spilled.
建议
Four-cup carrier
A four-cup carrier is a moulded tray that holds four drinks upright for group and delivery orders. Add it once your delivery share grows past a couple of drinks per order.
建议
Standard straws
Standard-bore straws serve iced coffee, soft drinks and fruit tea. They run on a different line from wide boba straws, so the two are quoted separately.
选配
Topping / side cup
A topping cup is a small lidded cup for extra pearls, jelly, syrup or cheese foam sold as an add-on. It lets you charge separately for toppings without repacking the drink.
选配
Brand stickers & labels
Brand stickers and ingredient labels are the cheapest way to put your name on plain stock packaging. They also carry allergen, flavour and best-before information where a market requires it.
客户常问的问题
定制包装的起订量是多少？
视品项和印刷方式而定：贴纸、包装纸、防油纸、防拆封条等低门槛品项约 5,000–10,000 个起；印刷杯子和封口膜起订量较高，因为机器要为你的稿件停线换版。几个品项一起下单能拉低每个品项的实际起订量——这正是从一家工厂买、而不是找五家的意义。
杯子能配我的封口机吗？
只要口径匹配就可以——95 mm 的杯子无法在 90 mm 的机器上封口。询价时把你的封口机品牌和型号一起发来，冷饮杯、杯盖和封口膜都会按它来定规格。
奶茶封口膜怎么定规格、怎么报价？
封口膜按所封杯口口径定规格（通常 90 mm 或 95 mm），按卷销售。报价为元/卷，应注明每卷米数和每卷可封杯数，便于你在供应商之间同口径比较。
限塑市场，你们能供纸吸管或 PLA 吸管吗？
可以。粗珍珠吸管和普通吸管都可在同一产线上做 PP、纸和 PLA。选材质前请先确认你当地的一次性塑料规定，各市场要求不同。
可以把几种不同产品一起下单吗？
可以，而且是推荐做法。几个品项一起生产，合成一次发货、一张发票，按一票报关，能大幅拉低每个品项的实际起订量。
下单前能拿到样品吗？
可以。你发来 logo 后，设计团队会在 24 小时内免费返回可印刷的效果图，随后寄出实物样品，让你上手判断纸板克重和封口膜质量。样品免费，运费由你承担。